Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB

Business Type
Manufacturer
Country
China
Category
Price

Product Detail

FEATURES OF GOLOHO-4313-AB Flammability,UL-94V0 certification Excellent resistance to high and low temperature, weather, ultraviolet light and aging, excellent performance of insulation and thermal conductivity Mix ratio 1:1, mixed color is W/G, low viscosity, good flowability, long working time, Rapid integrated curing speed, suitable for encapsulation of extensive module. Superior heat curing feature allows a wide range of area and depth of sealing parts, smooth surface and out from within. GOLOHO-4313(W)-AB is a two part flame retardant additional thermal conductive encapsulant particularly designed for electrical industrial. It will form rubber elastomer non-corrosive to metal at room or low temperature . HOW TO USE Two part Silicone Adhesive GOLOHO-4313-AB Stirred thoroughly before mixing Mixed in 1:1 ratio by weight Agitation: mixed thoroughly by low speed agitation Foam scrubbing: evacuation for 5 minutes after mixing. Dispose it if a small amount of operation or no critical request of foam. Encapsulation: pour into the article immediately after agitation and foam scrubbing thoroughly, it can flow flat naturally Curing 1:curing at room temperature for 2.5 hours. The cure rate is rapidly accelerated with heat Curing 2: curing by oven. After 30 min standing and foam scrubbing thoroughly and preliminary curing at room temperature, the encapsulant will be cured at 70? for 20 minutes

Similar Products

Adhesive Glu

About our Company

Business Type
Manufacturer
Established
1995
Employess
51 - 100 People
Annual Revenue
US$2.5 Million - US$5 Million
Products
Adhesive Glu

Regional Suppliers

Adhesive Glu in China

Contact Us

GOLOHO POLYMER (CHANGZHOU) CO. LTD

Ms. Neil Chen

China

Send us a message