How to make cvd diamond
CVD raf big diamond market
CVD diamond is diamond produced in an artificial process, as opposed to natural diamonds, which are created by geological processes. CVD diamond is used for ultra precision cutting tools (such as CVD indexable inserts, CVD boring tools, CVD reamers, CVD milling tools and other non-stand tools ).
The specification of CVD diamond plates :
Model length * width * thickness (mm)
CVD diamond plate 1 * 1 * 1
2 * 2 * 1
3 * 3 * 1
4 * 4 * 1
5 * 5 * 1
6 * 6 * 1
7 * 7 * 1
8 * 8 * 1
9 * 9 * 1
10 * 10 * 1
11* 11 * 1
12 * 12 * 1
Thickness of CVD diamond plate from 0.3mm to 3mm
We Can provide (100) (110) (111) three crystal orientation
Customized Sape and Size are Available
Advantages of CVD diamond:
High transmission,Good Thermal stability and chemical stability.. It is the best replacement of natural diamond .
CVD diamond has low surface roughness and good cutting edge compared to PCD tools.
CVD diamond has higher wear resistance than PCD and other diamond materials.
The thermal conductivity of CVD diamond is 50% higher than PCD.
Good hardness and long life exceed HPHT and natural diamond.
Applications of CVD diamond:
CVD diamond is used for semi-finishing, finishing, super finishing and continuous cutting of ultra precision cutting tools.
For Manufacturing a scalpel, ultra-thin medical tools such as biological section;
for processing mirror and rocket navigation gyroscope, computer hard disk substrate, electron accelerator ultra-precision mirror parts, etc
In addition, the CVD diamond is also used for other high-tech applications (such as diamond dresser, wire drawing die, electronics ,optical window, heat spreader and gem stone industry, etc)
Manufacturing a scalpel, ultra-thin medical tools such as biological section;
1, diamond has the brittleness, it is easy to produce cracks or debris after a certain impact, it is important to prevent the impact in the process of installation and use
2, When the air's temperature over 850 ?,the surface of diamond will have a carbonation reaction
3, in normal temperature environment is not suitable for cutting ferrous metals (iron, cobalt, nickel, manganese, chromium), except a protective gas cutting environment.
- Melting point(?):3800
-The thermal expansion coefficient(10-6/K):1.3