HZG Series Revolving Cylinder Drying Machine for Coal
Veneer roller dryer can keep the veneer smooth after drying. The output of veneer with the thickness of 1.7mm is about 40CBM per 8 hours. Bark and other tree waste can be used as the fuels for this drying line, significantly saving the cost.
Overseas technical staff for installation service is available.
This veneer roller dryer need to be customized according to the veneer size ,the factory area,the capacity requirement.
- - - -
Item Name | HZG Series Revolving Cylinder Drying Machine for Coal |
Raw Material | coal |
Heating Way | complex heat |
Heating Source | heavy oil |
Amount to be Treated | 5,000 kg/ h |
Primary Moisture | 6.5 % |
Final Moisture | 0.1 % |
Average Diameter | 5 mm |
Amount of Hot Air | 16,000 m3 / kg |
Temperature of Air at Inlet | 570 |
Temperature of Raw Material at Outlet | 75 |
Driving Power | 15 kw |
- - - -
# Applicable for drying big particles, heavy particles in chemical, mining, and metallurgy, such as mining area, cinder of blast furnace, coal, powder of metal, phosphate fertilizer and thiamine.
# For drying the powder or particles with special requirements, such as HP foaming blowing agent residue of alcohol, light calcium carbonate, active clay magnetic powder, graphite, and residue of medicine.
# This revolving cylinder drying machine requires materials to be dried under low temperature and large lot continuous production.
Why Choose Our Company:
Compared with the original way of drying machine main advantages:
1.The drying time is only 25-50% of ordinary drying machine, greatly improve the efficiency.
2.Small deviation drying effect is good (moisture content, high flatness, not easy to change color).
3.Reduced the wet veneer shear process, low loss, improve the rate of 3-5%.
4.Can dry the veneer of thickness 0.3 1.3 mm, large size range.