HZG Series Revolving Cylinder Drying Machine,
Revolving Cylinder Drying Equipment for ORE
When the dump raw material is fed from one terminal, it is turned over through blades that are distributed inside the cylinder and will be distributed uniformly in the drier and contact fully with the countercurrent hot air.
In this way, the process of heat conduction is increased. During the period of dry, under the effect of incline blades and hot air stream, raw material can be moved to the star section of drier and discharged from discharged form discharging valve.
- - - -
Item Name | HZG Series Revolving Cylinder Drying Machine, Revolving Cylinder Drying Equipment for ORE |
Heating Way | direct heating clockwise flow spec |
Heating Source | gas |
Amount to be Treated | 1,000 kg/ h |
Primary Moisture | 30 % |
Final Moisture | 15 % |
Average Diameter | 6.5 mm |
Amount of Hot Air | 39,000 m3 / kg |
Temperature of Air at Inlet | 600 |
Driving Power | 22 kw |
- - - -
After the damp waw material Is put into the drier from on end, it is trnned over through strrlng-up rake inside the cylinder and distributed uniform in the frier and contacted with countercurrent hot air fully. It speeds up heat and mass conducting of dry. During the oeriod of dry, raw material Is effected by stlrrlng-up rake with gradient and hot alr,lt can be moved and passed through the dry region and then discharge the flnshed product.
It is suitable for drying the follwina raw materials.They are granules with heavy specific aravity In chenmical industry, minef Industry, metallurgy industry such as ore, slag, coal, metallic powder, phospnorus fertilizer, ammonia sulfate Moreover for raw materials that are granules tith special requirements,such as GP vesicant, less, light calcium caroonate, active white earth, magnetic powderm,graphite, lag or medicine and raw materials that need low.
- - - -
Feature 1 | High in the extent of mechanization and strong in production capacity. |
Feature 2 | The resistance for fluid passing through the cylinder is small. The consumption of power and energy is low. |
Feature 3 | It has strong adaptability to the properties of raw material. The operation is stable. The cost of operation is cheap. |
Feature 4 | The uniformity of dried substance is good. |
- - - -