HDPE / PP / UPE Plastic Plain Bearings Anti Acid And Anti Alkali

Business Type
Manufacturer
Country
China

Product Detail

HDPE / PP / UPE Plastic Bearings , Anti-Acid And Anti-Alkali Plastic Bearings HDPE,PP,UPE(UHMWPE) are approved can be used in faintish acid and alkali environment (30% CuCl2 solution and 30% NAOH solution is tested ok). Such bearings can be operated in liquid and contamination sensitive environments as acid/alkali/salt/solvent/oil/gas/seawater, and have general performance of lubrication and maintenance free, none magnetism, anti-rust and eroded of plastic bearings. But these bearings have not strong mechanical strength, and easy to be out of shape, so couldn't be used in heavy load and high-speed application. Among these 3 material, UPE have more excellent strength and low friction and could be used to lower temperature (lowest to -150). Generally the rings and cage were made with HDP PP or UPE, balls were made with glass stainless or ceramic. The material of rings and cage: HDP, PP, UPE material. The material of Balls: Glass Stainless, Ceramic material. - - - - Basic properties of staple engineer plastic | Material | HDPE | PP | POM | PA66 | PVDF | PPS | PTFE | PEEK | Long-time working temp. | 90 | 100 | 110 | 100 | 150 | 230 | 260 | 280 | Density | g/cm3 | 0.91 | 1.42 | 1.14 | 1.77 | 1.35 | 2.18 | 1.32 | Ball indentation hardness | 50 | 80 | 170 | 170 | 80 | 190 | 30 | | Tensile stress | 25 | 30 | 70 | 80 | 50 | 75 | 25 | 95 | Sliding friction coefficient | 0.29 | 0.3 | 0.34 | 0.35-0.42 | 0.3 | | 0.08-0.1 | 0.3-0.38 | Melted temperature | 130 | 165 | 175 | 260 | 172 | 280 | 327 | 343 | Short-time highest application temperature | 90 | 140 | 150 | 170 | 150 | 260 | 260 | 300 | Coet of Inear expansion (10^-5/K) | 13-15 | 17 | 10 | 8 | 13 | 5 | 12 | 5 | Dielectric constant at 1 Mhz(10^6HZ) | 2.4 | 2.25 | 3.7 | 3.6-5 | 8 | | 2.1 | 3.2-3.3 | Volume resisrivity (cm) | >10^15 | >10^24 | >10^14 | 10^13 | 10^12 | >10^13 | 10^14 | 10^13 | flammability UL94 | + | + | - | (+) | (+) | - | + | + | Anti-weathering | - | - | - | - | - | - | + | - | Note: + =resistant; (+) =partly resistant; - =non-resistant | - - - - - - - - Chemical properties of Engineer plastic | Chemical Composition | Material | PI | PEEK | PTFE | PVDF | PA66 | POM | PP | HDPE | ABS | Acrtate | + | + | + | (+) | (+) | + | + | (+) | + | Formic acid (10% water) | + | + | + | + | - | - | + | + | + | Ammonia (10% water) | - | + | + | + | + | (+) | + | + | + | Aether | + | | + | + | + | + | + | + | | Petrol | + | + | + | + | + | + | (+) | (+) | (+) | Bori acid (10% water) | | + | + | (+) | + | + | + | + | + | Aminoform | + | + | + | | - | - | (+) | - | - | Aeti aid 100% | (+) | - | + | | - | - | + | + | - | Aceti aid (10% water) | + | + | + | | - | (+) | + | + | + | HF | | | + | | - | - | + | + | (+) | Formaldehyde aqu (30% water) | | + | + | + | + | - | + | + | + | Glycerin | + | | + | | + | + | + | + | + | Iodine, Glycol | + | | + | (+) | - | (+) | + | + | (+) | K2Cr2O7 (10% water) | | | + | + | + | - | + | + | + | KMnO4 (1% water) | + | + | + | + | - | (+) | + | + | (+) | 2-Hydronyprpionic 10% | + | | + | + | - | - | + | + | - | 2-Hydronyprpionic 90% | + | + | + | + | + | (+) | + | + | + | Nad (10% water) | + | + | + | + | + | + | + | + | + | NaNO3 (10% water) | + | | + | + | + | + | + | + | + | NaOH (50% water) | | + | + | + | + | - | + | + | + | NaOH (5% water) | | | + | + | + | - | + | + | | Oxalic (10% water) | + | + | + | + | (+) | (+) | + | + | + | Tetracarp | + | | + | + | (+) | + | - | - | (+) | H3PO3 100% | | + | + | | - | | | + | + | H3PO4 (10% water) | | + | + | + | - | - | + | | + | NHO3 (2% water) | + | + | + | + | - | - | + | + | + | HCL (2% water) | + | + | + | (+) | - | - | + | + | + | H2SO4 98% | | - | + | | - | - | + | (+) | - | Soap liquid | | | + | + | + | + | + | + | | Alkaliliquid (10% water) | | | + | + | + | + | + | + | + | Toluene | + | + | + | + | + | + | + | (+) | - | Water, cold | + | + | + | + | + | + | + | + | + | Water, hot | | + | + | + | (+) | - | + | + | + | H2O2 (30% water) | | (+) | + | + | - | - | + | + | + | H2O2 (0.5% water) | + | | + | + | - | (+) | + | + | + | Asphalt | + | | + | | (+) | + | (+) | (+) | | Note: + =resistant; (+) =partly resistant; - =non-resistant | | - - - -

About our Company

Business Type
Manufacturer
Products
Pillow Block Bearings, Software Applications

Contact Us

ZHEJIANG TOP BEARINGS CO., LTD.

Mr. TongLe TongLe

China

Send us a message