Mini Handheld Marking Machine , Handheld Laser Marker For Seal Lock
- - - -
Type | Portable | Desktop | Colorful | Floor Stand |
PC includes or not | Not includes PC | includes PC |
Laser Source |
IPG Series: | Pulsed, High Energy Ytterbium Fiber Lasers |
Mode of operation | Pulsed |
Polarization: | random |
Nominal average output power | 10W - 20W |
Central emission wavelength: | 1060-1070 nm ,Q-switched operation Output power adjustment range 10%-100% |
Emission Bandwidth (FWHM) | <10 nm |
Long-term average power instability | <5% |
Pulse width, (FWHM) | 100 ns |
Laser switching ON time | 180 sec |
Laser switching OFF time | 180 sec |
Pulse Repetition Rate* kHz | 20-80 kHz |
Energy per pulse (PRR = 20 kHz) | 0.95 mJ |
Typical beam quality, M2 | <1.8 |
Output fiber delivery length | 3m |
Operating voltage: | 220V |
Max. Power consumption: | 600W |
Net Dimensions: | 70*20*50cm | 58*22*50cm 80*38*72cm | 70*20*50cm | 143*62*101cm |
Net Weight: | 44 kgs | 53 kgs | 44 kgs | 130 kgs |
Gross Weight: | 60 kgs | 70 kgs | 60 kgs | 150 kgs |
Laser system |
Scanning Speed: | 0-7000mm/s |
Marking Speed: | 0-5000mm/s |
Marking size: | 110mm110mm (F-theta 160) |
Spot size: | 40 micron (F-theta 160) |
Cooling unit: | Air cooled |
Pilot laser: | 650nm diode laser, visible red light for marking guide |
Continuous working time: | 16h |
Humidity: | 45~85% (no condensation) |
Operating temperature: | 0~40C |
Control units | CT-MARK (English Version) |
- - - -
Fiber Laser marking is a fast and clean technology that is rapidly replacing older laser technologies. Direct part marking has now become a common process in many industries offering a non-contact, abrasion-resistant, permanent laser mark onto almost any type of material.
High speed, high precision, micro laser marking and/or laser engraving of part information, readable alpha-numerics, bar codes or 2D matrix code or serial numbers, corporate logos, etc. are possible on a wide range of component parts.
1. What's the service I can get if I buy your fiber laser marking machine?
Normally we give online support to our valuable customer, and we think online support is more than enough: with excellent technical documents and FAQ database,customers can trouble shoot and get the problem fixed in time, as for hardware failure, we would guide customer to get the proper replacement in most timely manner, make sure the production would not be hampered. On site service can also be given case by case.
2. What is your fiber laser source, I need Germany lasers, can you make it, and what is the difference between them?
Normally we configure China top fiber laser for our laser marker, cutter, the imported lasers could be given as per request. You are most welcome to consult our marketing specialist for the laser difference.