Fiber Metal Oval Tube Laser Cutting Machine on Mild Steel Metal Pipe
Why Laser Cutting Tube
Laser tube cutting is a single operation solution for wide range of tube cut features and complex tube end form geometry.
The use of existing tooling reduces piece price and tooling expenses considerably, and helps with faster part turnarounds.
Our ability to hold tight tolerances on complex laser cut geometry yields precision components ready for assembly, welding, finishing, and fabrication.
Fiber Laser Cutting Tube Advantages
1. Far more efficient with much lower power consumption
The increased electrical efficiency of fiber laser technology compared to CO2 drastically slashes the electrical consumption of the system, yielding savings on the utility bills and on the initial installation due to reduced requirements.
2. Superior performance in thin wall materials
The faster cutting speed of nitrogen assist fiber laser cutting on thin materials more than doubles machine productivity compared to CO2 cutting: thinner wall mild steel, stainless steel and galvanized are the materials that benefit the most from fiber laser cutting.
3. Zero laser maintenance required
The fiber laser does not require routine adjustments, component replacement or rebuilds. It does not consume laser gas. Laser beam quality is stable and consistant over time. It is ready to cut as soon as you turn it on. No warm up is required.
4. New materials for new opportunities
Copper and brass, materials that cannot be cut with CO2 technology CO2 can be easily cut with fiber laser. Even tricky grades of aluminium and galvanized steel are easily processed.
- - - -
Laser power | 700W/1000W/2000W |
Laser source | IPG fiber laser generator |
working mode | Continuous/Modulation |
Beam mode | Multimode |
Tube processing | =20-200mm, L=6m |
Tube category | Round, square, rectangular, oval tube etc,
(can customize if need to process other tubes) |
Rotate speed | 60 turn/minute |
CNC control | Germany PA |
Nesting software | Spanish Lantek |
Power supply | AC380V5% 50Hz (3 phase) |
Total electric power | 17KW/18KW |
Position accuracy | 0.2mm |
Repeat position accuracy | 0.3mm |
Maximum position speed | 70m/min |
Acceleration | 1g |
Format supported | Solidworks,Pro/e,UG, etc |
Flooring | 12m x 4.5m |
Machine weight | 7.8T |
- - - -
Laser can cut round tube, square tube, triangle tube, rectangular tube, oval tube and other irregular-shaped tubes, etc. Suits for materials such as stainless steel, mild steel, carbon steel, aluminum, brass, copper, galvanized steel, etc.
Widely used in furniture, medical device, fitness equipment, oil exploration, display shelf, farm machinery, bridge, shipping, structure parts, etc.