Strong Adhesive Thickness Car Floor Sound Deadening High Temperature Resistance

Business Type
Manufacturer
Country
China
Category

Product Detail

Strong Adhesive Thickness Car Floor Sound Deadening High Temperature Resistance Product Description WanTai butyl material car sound deadening is a light-weight, elastomeric butyl and aluminum constrained-layer vibrational damper. With multi-layer composite, WanTai butyl material car sound deadening not only reduces the noise but also the vibration, and it can isolate the heat outside the car. The butyl material car sound deadening can easily fuse to sheet metal and other hard substrates. Applying with butyl material car sound deadening, it can strengthen your cars body panel too. The material is highly resistant to aging and makes your car be quiet and cool all the time! It is the base deadening of sound control. Applied with the butyl material car sound deadening reduce greatly the noise delivered from your vehicle body, it converts the sound & vibration energy to heat. It will increase the loss factor up to 0.417 at 20. You can easily get more pure and quality music. Functions : 1, Release the structure transmission attenuation vibration energy 2, Decrease Vibration and Heat From the engine 3, Decrease Interior (speaker and car body), Engine, Exhaust Noise, and Vibration. 4, Reduce External noise (tires on the road, other cars, wind, etc) 5, Lessen the vibration of the structure shaking or the striking 6, Increase the value of your vehicle 7, Increase your car audio sound effect, make you better music! 8, Enjoyed you a Cool, Quiet and Comfortable ride Features: Use for floor, door,trunk, stereo enclosures, under dash, inner firewall and etc Easy-to-install, very high-strength adhesive butyl rubber Eliminate body/floor vibration Better audio sound quality Installation: 1.Clean up the mounting surface, like the hood, trunk, floor, (for door and roof , need to remove the door panel, roof panel) with a quick-drying and residue-free solvent. Remove all dust, dirt, oil, moisture etc. 2.Use scissors, knife or die to cut the mat to the desired size and shape before removing the release liner. ( Note: work gloves should be used when handle foil backed material because the sharp edges when cut to different size)

Similar Products

Scooter Parts

About our Company

Business Type
Manufacturer
Products
Scooter Parts

Regional Suppliers

Scooter Parts in China

Contact Us

Shenzhen super car audio products limited company

Mr. Wei Wei

China

Send us a message