High Lumen 4 Foot T8 Led Tube Light 2280lm For Home / Led Tube Light Bulbs
1. Using international well-known brand of SMD2835/SMD4014 LED as the light source,which can ensure the LED tube brightness and long lifetime, also can reduce the light decay.
2. High-grade PC cover with nice light transmittance(> 95%),Transparent PC cover and milky PC cover are available.
3. Safe experience: Isolated constant-current driver, input voltage: AC100-240V/277/ 50-60Hz, the voltage is avaliable for different countries'request.
4.Wide beam angle wtih 140 degrees makes the lighting effect much better.
5. Less power consumption: LED light source provide a lot more luminous flux than the original light source while they cost less power consumption under the same condition.
6. LED light saving 50% electricity compare to the traditional fluorescent tubes.
7. No radiation, No any mercury and other harmful materials, environmental-friendly.
Specifications of Magnetic Ballast Compatible T8 LED Tubes:
Part Number: TECH-T8-1200-J1019A
CRI: 80 Ra (Typical)
Construction: Aluminum; PC Lens
Physical Dimensions: 26*1200mm
Remark: Compatible with ballasts
Input Voltage: AC 100~277V 50/60Hz
Power Consumption: 19W
Light Source: SMD LEDs
Luminous Flux: 2280lm
Color Temperature: 3000K (Warm), 4500K (Neutral), 6000K (Cool)
- - - -
Features of Magnetic Ballast Compatible T8 LED Tubes: |
1: Compatible with electronic ballast (no re-wiring needed);
2: Can be plugged in directly without removing and rewiring or bypassing the electronic ballasts;
3: Can work in AC 100~277V directly;
4: DLC / TUV certified; |
Advantages of Magnetic Ballast Compatible T8 LED Tubes: |
1: You just need to plug the T8 LED tubes into an existing fixture with no rewiring no cutting of wires just plug them in and they will work.
2: If you use with ballast and ballast dies, then you can remove ballast and reuse the tubes. |
Applications of Magnetic Ballast Compatible T8 LED Tubes: |
1: For retrofit project, you dont need to remove ballast until ballast fails, then you just remove ballast and
reinsert tube, it will work without ballast.
2: For new installation project, you can just install the T8 LED tube without any ballast, just direct wiring to
the lighting fitting at 100-277 Volts AC. |
- - - -
Q1: Can I have a sample for testing?
A: Yes, we can offer free sample, but you should afford the shipping cost.
Q2: Can I add my logo on the products?
A: Yes, OEM and ODM are available for us.
Q3: How can I get the after-service?
A: We will send you the free spare parts if the problems caused by us. If the products cannot be repaired, we will send you new products together with next order.
Application in USA: