Small Size Hot Air Welder Equipment / Hot Air PVC Seaming Machine
1. The overall weight of the machine increased, with a better effect of pressure!
2. Power switch with front knob type, more convenient operation!
3. Wind gun fixed block, adopthook-type, easier than the previous hand-operated!
4.Adopt3400W high-power air gun, the whole power 3600W, to ensure the effect of splicing under the premise of the actual width of the welding widening!
5. Exclusive design, splicing + package rope one round, not only can be stitching, but also package rope / package edge!
6. The king of splicing speed, in order to ensure splicing 520/550 inkjet cloth effect under the premise of the fastest 15 meters per minute, is the inkjet processing plant Gospel!
1. Small size, light weight and easy to carry
2. Digital display function
3. Wind is adjustable
4. Welding speed is fast
5. Do not have fold during the welding process
6. Having press-wheel, it is easy to move
7. Laser precision positioning system
1. Any part of this machine being bumped of fallen can cause some damage impossible to be repaired.So please pay attention to carry it.It is suggested to move the machine by manpower and put it downcarefully.
2. Please check if there is damage or missed parts after unpack the machine.Any problem, please contact us or the local agent immediately.
3. The place for installation must be flat and the floor is strong enough to support the machine and moreover, the installation place should close to power supply.
4. Keep the installation place no dust and avoiding sunshine.
5. Please sweep away the anti-rust oil from the machine with detergent and re-lubricate with light lubricating oil after installation.
1. During operating, if the surface cloth is dissolved and scorched or the cloth are not sticked together, please stop to adjust the temperature or speed.
2. During operating,if the seaming part is not in right position, please stop to adjust fixing position.
3. During operating, make sure clothes are flat so that stick together smoothly.
4. The hot wind of heater cannot touch the press-wheel or the rubber of press-wheel is easy to be burned down.
5. Adjust temperature to zero before turn off the heater.Switch off after 5-10 minutes.