Printing Cloth Splicing Machine With Cloth Waterproof Canvas Heat Welding Machine
1.no glue stitching:
502 and other glue out of the stage of history, improve the working environment of workers, improve the efficiency and quality of stitching, low-carbon environmentally friendly products, the inevitable trend of future development.
2.digital temperature control:
equipped with a temperature feedback sensor, always monitor the temperature of the outlet, the use of advanced PID control technology, automatically adjust the power to make the temperature more constant. 5 . Stitching more evenly. Using zero-crossing trigger IC control, no harmonic interference. No matter how long the splicing picture, the stitching effect will not change. (Other domestic similar products: artificial knob to adjust the trigger angle control, harmonic interference is relatively large and the temperature is displayed in the output voltage value, can not reflect the real temperature value. The actual temperature changes with the input mains voltage High and low, very constant, sometimes temperature difference up to 50 above. Cheap quality but poor quality).
6-15m, according to set the temperature and the thickness of the cloth can be appropriate to adjust the line speed.
4.the temperature range:
0-700 with button according to their own circumstances can be set arbitrarily.
5.R & D production capacity:
with all the core technology, quality control. R & D capacity.
1000-2000W (set the required temperature, according to the required temperature and power automatically adjusted.)
7.hot air wind speed:
50-100% adjustable to ensure that the cloth is easier to burn, heat longer life.
AC fan, the wind is more powerful, longer life (more than 2000 hours), just replace the carbon brush, low cost.
1.Adoptindustrial control panel, digital temperature control, temperature control is plus or minus 1 . (The more accurate temperature control, the better the splicing effect)
2.AdoptSwiss imports Leister heating wire, the normal life of 3-4 years, the middle do not have to replace the accessories.
3.Adopt AC fans, more powerful wind, life more durable.
4.Laser positioning, the development of scalable handrails, so that the perfect splicing, the use of more comfortable.
5. Automatic sleep function, more cost savings
- - - -
Model | LC 3000C |
Voltage | 110--230V |
Frequency | 50--60Hz |
Whole Power | 800--1800W |
Air pressure | 2500Pa |
Welding speed | 6-9 m/min |
Welding thickness | 0.2--2mm |
Largest welding width | 3--4cm |
Cross weight | 18Kg |
Net weight | 15Kg |
Outside dimensions | 485285280 mm |
Electric shock protection category | I |
Welding temperature | 20-700 |
- - - -
1. A 10m power cable.
2. A Wrench
3. One piece of manual
4. Video CD
Parts of hot air welding machine
Please pay attention:In order to keep heat element,we add Automatic Dorman
1. Temperature knob
2. Wind speed knob
3. Walking speed knob
4. Reset knob
5. Temperature feedback sensor
6. operation handle
7. Wing sheath
8. Heat gun
10. Press wheel
11. Carry handrail
12. Carry handrail
13. Actual temperature
14. Set temperature
15. Walking speed
16. Turn up temperature button
17. Turn down temperature button