RS 485 CE approved Tripod Turnstile Gate , Bus Turnstille For Entry System
The turnstiles are used to manage passages by working with different kinds of readers and writers.
The housing comes out from stainless steels pressing which is good-looking,anti-rust and durable. It can be integrated with magnetic card, bar code, IC and ID card by standard electrical interface, thus good-order and civilized passing means are realized and unauthorized persons will never be allowed to get in. Meanwhile, to meet fire-control passage requirements.
1. Material:304 Stainless Steel
2. Single direction or bidirection
3. Standard interfaces are convenient for connection with different readers which can send relay signal
4. RS485 interfaces can connect turnstile with computer directly
- - - -
Power Supply | AC220V10V ,50Hz / AC110V10V ,60Hz |
Power Consumption | 100W |
Temperature | -30 to 60 degrees |
Humidity | <95%, without concretion |
Passage Width | 600mm |
Passing Speed | 30 persons/min (normal open), 20 persons/min (normal close) |
Arm Open/Close Time | 2s |
Input Interface | +12V electrical signal or impulse signal with width more than 100ms, drive
current >10mA |
Communication Interface | RS485 (Distance: <=1200m) |
Working Environment | 340*320*1000mm |
Size | Uni-direction or Bi-direction |
- - - -
Tripod Turnstile Gate Main Functions
1) Running stable, little noise and no mechanical impact
2) Various working means can be set in the control panel menu, namely:bi-direction card reading passing, or one direction card reading passing and another passing limits, or one direction card reading passing and another free passing, etc.
3) It is with RS485 connection for far control arm up and down to satisfy the special needs or fire control requirements.
4) Self-checking-power-on function, if power on, turnstile will auto get to be held.
5) If power off, arm will fall automatically while power on later, lift arms manually for semi-automation type. (And arm will be automatically lift if power on for full-automation type.)
6) It is with standard electrical interface to connect various kinds of readers and writers for easy integration and also computer far control and management can be realized by computer.
7) Unique incomplete wheel transmission is adopted to make turnstiles held or unheld in zero position more accurate and reliable.
8) Re-position function. After card reading, if passenger not through within the specific time, system will auto cancel passing right for this time and the limit passing time length can be set.
9) Full auto type has two more following features:
* Uncompleted wheel turning system is adopted for locking the turnstile in zero,and unlocking will be more
The tripod turnstiles can be used in all places which need to control people in and out.