Home Appliance / Power Lvds Display Connector 1.25mm With DF13 series Phosphor T

Business Type
Manufacturer
Country
China
Category

Product Detail



1, Detailed form of product specification



- - - -
Basic size information |
Color | Grey |
Pitch | 1.25mm |
Row | Single |
Wire Insulation O.D. | 1.0mm(Max) |
Terminal Materials | Phosphor |
Finish terminals | Tin-plated or gold-flash |
|
Electricalproperties |
Current Rating | 1A AC, DC |
Voltage Rating | 150V AC, DC |
Contact Resistance | 30m Max |
Insulation Resistance | 500m |
Withstanding Voltage | 500V AC/minute |
|
Mechanical properties |
Temperature range | -25 to +85 |
- - - -



More characteristic of this part, please kindly check the following pictures. Wish you can get the rightparts from our company. Thanks a lot!!!



2, Related drawing and report





5. Mechanical Performance



- - - -
Test Description | Procedure | Requirement |
5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw connectors at the speed rate of 253mm / minute. | Refer to paragraph 7 |
5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 253mm / minute.(Based upon JIS C5402 6.8) | AWG#26 | 2.0kgf (Min) |
AWG#28 | 1.0kgf (Min) |
AWG#30 | 0.8kgf (Min) |
5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 0.50kgf (Max.) |
5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 253mm / minute on the terminal assembled in the housing. | 0.50kgf (Min.) |
5-5 | Pin Retention Force | Apply axial push force at the speed rate of 253mm / minute | 0.50kgf (Min.) |
5-6 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. | Contact Resistance 60m (Max.) |
5-7 | Vibration | Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) | Appearance No Damage. Contact Resistance 60m (Max.) Discontinuity 1 sec.(Max.) |
5-8 | Physical Shock | 490m/s50G,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) |
- - - -

Environmental Performance And Others



- - - -
Test Description | Procedure | Requirement |
6-1 | Temperature Rise | Carrying rated current load.(Based upon UL 498) | 30(Max.) |
6-2 | Heat Resistance | 852,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A) | Appearance No Damage. Contact Resistance 60m (Max.) |
6-3 | Cold Resistance | -253,96 hours (Based upon JIS C0020) |
6-4 | Humidity | Temperature: 402 Relative Humidity : 90~95% Duration: 96 hours (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B) | Appearance No Damage. Contact Resistance 60m (Max.) Insulation Resistance 50M (Min.) Dielectric Withstanding Voltage Must meet 4-3 |
6-5 | Temperature Cycling | 5 cycles of: a) -55 30 minutes b) +85 30 minutes (Based upon JIS C0025) | Appearance No Damage. Contact Resistance 60m (Max.) |
6-6 | Salt Spray | Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 51% solution at 352. (Based upon JIS C0023/MIL-STD-202 Method 101C Cond. B) |
6-7 | SO2 Gas | 24 hours exposure to 505ppm. SO2 gas at 402. |
6-8 | NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
- - - -

- - - -
6-9 | Solderability | Soldering Time: 50.5 sec. Solder Temperature: 2455 | Solder Wetting 95% of immersed area must show no voids, pin holes |
6-10 | Resistance to Soldering Heat (DIP) | Solder pot method Soldering time: 100.5 sec. Solder Temperature: 2605 Solder iron method Soldering Time: 50.5 sec. Solder Temperature: 370 ~ 400 | Appearance No Damage. |
6-11 | Resistance to Soldering Heat (SMT) | When reflowing Refer to paragraph 8 Solder iron method Soldering Time: 50.5 sec. Solder Temperature: 370 ~ 400 | Appearance No Damage. |
- - - -




3, Part's Application

This product are widely used in household appliance, computer, communication device. Because we can controll NPL ratio under 1.0%, so our parts are trusted by famouse and international company like TPV, LeTV, Emerson, Amphenol Corporation, Skyworth, LuXshare, BYD etc. And the all products are certificated by REACH, UL, RoHS. Some parts are halogen free which is friendly toenvironment.
Mr. Ricky Zou

Contact Details

Similar Products

Electric Meter

Our Product Showcase

About our Company

Business Type
Manufacturer
Products
Electric Meter

Regional Suppliers

Electric Meter in China

Contact Us

Dongguan Xinpei Plastic & Metal Electronic Co. Ltd

Mr. Ricky Zou

China

+86-769-82109962

http://www.circuitboardwireconnectors.com/

Send us a message