Automatic Welding Of Flex Banner Welding Machine /
Plastic Welder Machine
Application field :
Use for weld PVC, PE and other material can be hot melt, like flex, PVC cloth etc
No need glue, use hot air to weld
Temperature, speed, fan motor speed are adjustable
Welder nozzle has a sensor, can make the true temperature accurately
High welding quality
Main technical details :
- - - -
Rated voltage: AC110-240V Frequency: 50-60HZ Power: 1000-3000W Temperature scope: 0-500 Speed scope: 1-15m/min Dimension: 41*25*20c Weight: 15kg Splicing width: 2-5cm Welding Thickness: 0.22-2mm Welding width: 2-4cm Welder cable: 10 meters Welder wheel: Aluminum wheel |
- - - -
Operation Step :
- - - -
step 1 | Before hemming or welding, leave 30-40mm wide overlap edge for connection the two disjunct surface pieces, immobilize both ends of each disjunct pieces with something such as stick belt or clamp |
step 2 | Turn on the power, according to quality and thickness of the PVC banner, consider the ground circumstance, set the proper termperature and speed, adjust the suitable hot-air blowing rate, wait for machine hot up around 2 minutes |
step 3 | Bring up the machine, place the rubber wheel at the end of the overlap edge |
step 4 | Turn the handle to left down, insert the welder nozzle into the gap of two overlap pieces, then the machine will moving and seaming automatic |
step 5 | During welding, use the gripe to align the moving direction, let the upper piece edge be in touch with the inner side of the welder nozzle |
step 6 | After the machine go pass the overlap edge to the end, the two disjunct pieces will be joined together, then turn the welder handle to right, it will stop moving |
step 7 | Turn off the heater switch, wait the gun come to cold, then turn off the power supply is ok |
- - - -
To prolong the electrothermal heater, after work it is strongly advice that cooling the heater at first, then turn off the power 5 minutes later. In case of the power suddenly be off, should handle the welding gun away firstly, and close down the temperature knob, nextly consider the problem of power supply.
To get better satisfied bonding effect, the ground of the overlap pieces should be smoothly, hard and heat resistive. We suggest that the operator may do some more test and practice using some samples of the pieces to get the suitable speed and temperature and hot-air blowing rate before operate it for seaming formally
1. Q : What's the Function ?
A : The Function is : Welding PVC / Flex Banner , Plastic and other materials can be hot melt .
2. Q : What's the MOQ ?
A : The MOQ is one set of Welding Machine .
3. Q : Is it automatic work ?
A : yes , It is automatic welding .
4. Q : How long is the warranty period ?
A : The warranty is one year .
5. Q : How can i pay ?
A : Our company accept : T/T , Western union , Paypal .
Please send your Inquiry Details at the below , Thank you !