30 mm knife thickness waste shredder machine with 15 to 30 m per hour output
Emissions of waste in life more and more, including waste, medical waste, industrial waste, eat hutch garbage, but the content is more of living garbage, about 60%. In order to achieve reduction, innocuity and recycling of living garbage disposal method is landfill, incineration, the early stage of the process chain is the breakage reduced size first, then on to the next step processing, this would require the use of garbage crusher is suitable for the living garbage.
Overload protection with automatic reversal-shredders include an electronic protection system to automatically stop and reverse the shredding action in the event of system overload. The system allows the shredder to clear itself and then continues the shredding process automatically.
Advanced bearing protection system-Multiple barriers of mechanical labyrinth and conventional seals, protecting costly bearings and ensuring maximum on-line reliability.
Efficiency shredding-Counter rotating shafts turn at slightly different speeds increasing the efficiency of the shear and tear action.
Economical & practical-From the low speed, high torque electromechanical driving system to our robust cutting chamber design, shredder are design for energy efficiency and low maintenance cost.
Low noise & Non-ballistic operating-Low speed and high torque industrial shredders operate at low noise levels without creating dust and flying particles.
Severe Shock Protection-Cushion drive system absorbs minor shock loads and automatically stops the shredding action in the event a non-shreddable item is introduced into the cutting chamber.
High alloy heat treated cutter for extra long life,anti-corrosive and wear-resistant.
NSK tapered roller bearings, hexagonal cutter shafts designed for extra durability.
The machine can be used for: Various type of plastic, rubber, tyre, fiber, paper, cardboard, wood, iron barrel, scrap cable wire, waste home appliance, household waste, etc.
Shredder machine is mainly used for primary processing of different waste material, reduce the material size for further processing.
With the technical development,Now we have two materials of blades,such as 9sicr and SKD.In general,we will equip it with 9sicr blades,if you need SKD,We can also equip SKD blades.
- - - -
Model | HL 30-4 |
Motor power (kw) | 45 |
Hopper size (mm) | 900*800 |
Discharge size (mm) | 30*80 |
Cutter thickness (mm) | 30 |
Shaft speed (rpm) | 8 |
Capacity (m/h) | 15-30 |
- - - -
# We offer the best solution according to clients requirement in time.
# We accept and respect clients creative idea. We will try our best to integrate clients idea into the machine and take our years of experience into consideration.
# We accept clients sample materials sending for test and take videos.
# We could offer our technical design before the purchase order.
Our skilled technicians are available for on-site installation, commissioning & training on request.