Large Scale High Speed Automatic Non Woven Fabric Cutting Machine 100 -150m / min
This machine can process the wrapped non-woven duster cloth (rub cloth); cylinder containing wet cloth. Frist it drills the big wrapped non-woven fabric, re-rolled it into small volume of strip torm, and then cut it into the products with the specified length according to our will.It is equipped with fittings of infrared way to count numbers, pneumatic broad strap in-phase transferring,transducer control to adjust the apeed ,etc. It has the advantages of convenient operation and good stability and has characteristic of one machine for many applications. It integrates automatic perforating, separately cutting, counting slices and rewinding. This machine isquipped with the transducer for adjusting of line measuremengt for perforating and can real apiral thread. Cutting neatly, counting slices correctly, running smoothly, low noise, high efficiency.
- - - -
Model | QX-R2(1200-4000) |
Productfeatures | Slice,lamination |
Equipmentauxiliarymachine | Non-wovenfabriccuttingmachine |
Cuttingrawmaterial | Beautytowel,masktowel,cloth,wipecloth |
Productionspeed | 100-150m/min |
Power | 50HZ3-7kW380V |
Weight | About3800kg |
- - - -
1 The equipment can cut all kinds of nonwoven cloth cloth; hot air; hot rolling; acupuncture cloth; plastic film; kraft paper; carpets and other products.
2 The working principle of the equipment: automatic feeding, automatic correction, automatic deviation, automatic cutting, automatic cutting, automatic closing, and automatic feeding.
3 Device equipped with pneumatic automatic feeding device, the maximum load weight of about 800KG, convenient operation.
4 Equipment with wide belt conveyor device and two control device, in order to ensure the accuracy of the finished product.
And with a set of positive and negative transfer device, a set of automatic deviation correction device with tail.
5 Equipment with circular type pneumatic knife size, convenient adjustment, light and smooth, neat cutting, face smooth without burr.
6 Equipment with pneumatic shaft winding, the winding is neat without deviation. The machine can produce a product with a core or no core.
7 Equipment with air pressure function, so that the production of products more beautiful.
8 Equipment is equipped with infrared automatic counting device and automatic stop function, counting the number down, accurate.
9 The traction and cutting device of the equipment are equipped with automatic pneumatic lifting device, which is convenient to wear, and the operation is more humane.
10 The equipment adopts imported frequency conversion speed control, electric parts and wiring is reasonable, beautiful, easy, easy to operate.
11 The overall frame adopts the international molding steel, the surface is rust prevention processing, the frame welding size is accurate, the standard screw is made of domestic high quality 45# steel and inner six angle screw, the table and the product is easy to cause health effects. 304 stainless steel material is used.