Automatic Paper Roll Slitting Machine / Roll To Sheet Cutting Machine
Device is equipped with multiple folding device, after slitting line raw material automatic line, slitting and rewinding, synchronization is complete, device performance and stability, the transmission from the 9-59cm, adjusted line length, product cutting neat without burr, replacement devices configured according to requirements of customer product. For details, please contact us.
The whole frame use the formed steel, surface and antirust processing, all machine bedplate must do antirust paint processing, frame welding is accurate in size, stent of appropriate reinforcement, pulley, gear and all transmission part center accuracy, ensure the smooth operation of the machine, machine within two years will not be off the plastic phenomenon.
Standard screw is the main component of domestic high quality 45# steel and the inner six angle screw, the product is easy to cause health effects of the parts used in stainless steel, the whole electrical degree of the whole part of the two years will not rust, take off.
- - - -
Model | QX-R1500(b) |
Cuttingdevice | circularknifecuttingtype |
Wiredevice | screwthread |
Wayofreceiving | specialpneumaticpressingdevice,technologyanddomesticleading |
Cuttingrawmaterial | spunlacecloth,non-woven,meltblown,Jakob,spunbondnonwovensandcanbe classifiedtextilematerials,suchaspapercutting,withmaterialandthefieldtest. Controlprogram:frequencyconversionspeedcontrol |
Productionspeed | 60-100M/min |
Parametersetting | Colortouchscreen |
Controlprogram | PLCservodrive |
Weight | ofabout2800kgspecificweightdependingonthemachineconfiguration |
- - - -
1 equipment requirements: folding, punching, cutting, counting, receiving the same time.
2 device is equipped with 5 sets of folding device, and the line is divided into the following line. Synchronization performance stability. Unique domestic.
3 automatic counting down function (infrared ray),
4 the roll with a continuously variable transmission device can adjust the winding speed.
5 the original cloth is placed in a wide belt conveyor, the gas is up to the axis and can be continuously adjusted and the tension device is capable of conveying the pneumatic synchronous conveying.
7 the air pressure of the winding device is equipped with 2 stainless steel roll.
8 the product width can be adjusted in a certain range, the drilling section is an additional gear type stepless transmission from 10cm-50cm, without changing the length of any adjustment line.
9 equipment with high precision aluminum alloy and wrinkle.
10 stepless speed regulation, can control the play line, cut into the complex volume speed, counting, online cutting knife 10 sets, can adjust the cutting size.
11 match wear rubber roller pneumatic conveying length adjustment, pneumatic automatic cloth, pneumatic with wide belt conveyor.
12 equipment cutting device equipped with pneumatic tool, pneumatic knife automatic device automatic lift and move around.
13. The machine equipped with adjust tension force device II office, production is the core of coreless rewinding products, can hit the wire rewinding or not hit the line rewinder configuration adjust rewinding elastic device.
14, the device uses frequency conversion control, electrical wiring is reasonable, clean, safe, easy to operate.
15. The whole frame use the formed steel, surface and antirust processing, all machine bedplate must do antirust paint processing, frame welding is accurate in size, stent of appropriate reinforcement, pulley, gear and all transmission part center accuracy, ensure the smooth operation of the machine, machine within two years will not be off the plastic phenomenon.
16. Standard fasteners of main parts of the hexagonal screw and high-quality domestic 45# steel, the product easy to cause the health impact of the parts are made of stainless steel materials, machine electricity part within two years will not rust, delamination.