Small Clear Multi Cavity Injection Molding POM Parts Double Shot Molding
Gerneral Description :
- - - -
Project Name: WRS2813 |
Mold Number: NTT-817-1-1 |
No. of Cavities: 1 x 16 |
Shrinkage: 1.018 |
Resin: POM |
Color of Part: Clear |
Mold Maker: NTT Mould Co. Ltd |
Mold Lead Time: 4 weeks |
- - - -
High quality plastic injection molds, injection molding and part assemblies.
Capacity for Molds:
30 sets of moulds per month;
Mold tolerance 0.005 mm, Part tolerance 0.02 mm
Automotive, electronics, home & office appliances, medical, etc.
Strictly comply with ISO 9001, and use quality document system to control every process of design, production and inspection.
Hot runner mold, over mold, two-shot mold, unscrewing mold, multi-cavity mold, etc.
If you have any project to do with us, we will have an engineer to follow up from your project from beginning to end, in English communication.
- - - -
DFM | once project tick off, we will do the DFM first. To check with you about the shrinkage, parting line, gate, eject, sliders and so on. Or if we find any problem with the part design, we will have suggestions on the DFM for your reference. |
Mold Specification | before mould design, we will check carefully for details, to make sure everything is right to your request. If any points can not sure for design, we will write on the file, then you can fill up to send back to us |
Weekly Report | Once the mold design is approved, we will start to purchase material and build mold. Every Monday we will send weekly report attached with pictures, to show you the project progress. |
Molding Report & Sample Dimension Report | when mold is finished, we will test it and send the video of mold trial. Also we will test the samples and send you report, to let you know which condition we test the samples and the samples dimensions we get. |
Mould Inspection Record | Before shipment, we also measure the dimension of mould, and send the file to you to let you the mold status. |
- - - -
1) Part Material:PA, POM, PMMA, ABS, PC, PE, PP, ABS+PC, PVC, Nylon, TPE, TPR etc.
2) Mold Cavity: Single or multi-cavities.
3) Mold material: Steel P20, NAK80, S136, 1045, H13, 718.718H, 2311, 2344, 8407, 2083 and so on
5) Mold Lifespan: 200,000 to 1,000,000 shots
6) Surface Finish: chrome plating, silk-printing, texture, color painting etc.
7) Nowadays,the biggest mold we can build is1400*1100*1000mm and weight of 10 tons.
Mold tolerance 0.005 mm, Product tolerance 0.05 mm
8) The product in the pictureis only for reference, we can build all kinds of injection molds as per your reqeusts.
German Precision, American Service, Chinese Prices Thats NTT Mould!