Wear Resistant electric Slurry Pump Part of high chrome alloy or rubber, Impellers, liners, frame plates, covers
High Head l mining electric slurry pump is horizontal,cantilevered,centrifugal,single stage slurry pump, with the advantages of high efficiency, large capacity, non-clogging, good performance of NPSH and anti-wearing and anticorrosion materials, widely used for handling the mixture contained of abrasive and corrosive solids in electric power, metallurgy, mine, coal, constructional material and chemical industry departments, especially for removing ash and sludge in electric power station.
High Head l mining electric slurry pump, double casing structure, high efficiency, wear resistant, stable performance, easy assembly, lining and impeller can be made of wear metal, and the discharge outlet can be adjusted with rotation interval of 45 degree, the impeller can be cut for site condition, the pumps can be operated in series and driven with belt..
Paper and Pulp
Bottom Boiler and Fly Ash
More than 10 years slurry pump and parts manufacture experience
1. Slurry pump parts
Completely interchangeable withslurry pumps and gravel pumps
For unlisted slurry pump parts, OEM service offered---Drawings needed.
- Pump V[olute];
-Cover Plate & Frame Plate
High chrome alloy: A05, A07, A33, A49, etc.
Natural rubber: R08, R26, R33, R55, etc.
Other material as per requests, like stainless steel, duplex stainless steel, Nickle alloy, Alloy 20, etc.
3. Short delivery time
For some slurry pump parts, stocks are available. We have large producing capacity to shorten the delivery time.
4. OEM slurry pump part codes
Here we list some OEM part codes for reference:
Impeller: 127, 147, 145, etc., such as C2127, D3147, E4147, F6147, G8147, G10147, FAM1247...
Volute liner, C2110, D3110, E4110, F6110, G10110, G12110, ...
5. Frame & Bearing Assembly types
Types: B, C, D, E, F, R, X, ST, T, TU, CC, DD, EE, FF, etc.
6. Notice for inquiry
Please send us complete slurry pump part name, part code and material name.
We arrange express delivery for you for urgent needs, such as DHL, Fedex, TNT.
Slurry Pump Part Material
- - - -
Part Name | Material | Specification | HRC | Application | OEM Code |
Liners & Impeller | Metal | AB27: 23%-30% chrome white iron | 56 | Used for higher wear condition with pH between 5 and 12 | A05 |
AB15: 14%-18% chrome white iron | 59 | Used for higher wear condition | A07 |
AB29: 27%-29% chrome white iron | 43 | Used for lower pH condition especially for FGD. It also can be used for low-sour condition and desulfuration installation with pH no less than 4 | A49 |
AB33: 33%-37% chrome white iron | | It can transport oxygenated slurry with pH not be less than 1 such as phospor-plaster, nitric acid, vitriol, phosphate etc. | A33 |
Rubber | | | | R08 |
| | | R26 |
| | | R33 |
| | | R55 |
Expeller & expeller ring | Metal | B27: 23%-30% chrome white iron | 56 | Used for higher wear condition with pH between 5 and 12 | A05 |
Grey iron | | | G01 |
Stuffing Box | Metal | AB27: 23%-30% chrome white iron | 56 | Used for higher wear condition with pH between 5 and 12 | A05 |
Grey iron | | | G01 |
Frame/Cover plate, bearing house & base | Metal | Grey iron | | | G01 |
Ductile iron | | | D21 |
Shaft | Metal | Carbon steel | | | E05 |
Shaft sleeve, lantern ring/resctrictor, neck ring, gland bolt | Stainless steel | 4Cr13 | | | C21 |
304 SS | | | C22 |
316 SS | | | C23 |
Joint rings & seals | Rubber | Butyl | | | S21 |
EPDM rubber | | | S01 |
Nitrile | | | S10 |
Hypalon | | | S31 |
Neoprene | | | S44/S42 |
Viton | | | S50 |
- - - -