3.3V Power Supply Fiber Optic Transceiver 155Mbps With Dual Fiber SC 1310nm 40Km

Business Type
Manufacturer
Country
China
Category

Product Detail

FA-TC901S13-40, Fiber Optic Transceiver 155Mbps With Dual Fiber SC 1310nm 40Km 3.3V Power Supply ESD is an inevitable phenomenon in nature, in order to prevent ESD, we can pay attention on two aspects: preventing the accumulation of charge and allowing the electric charge to discharge rapidly: A, Keep the humidity of the environment 30 ~ 75%RH; B, Designated special anti-static areas. Use anti-static floor or worktable; C, Using public grounding with parallel grounding for related equipment and ensure the shortest grounding path and minimum ground loop, cannot use serial grounding and should avoid the use of external connection design for grounding circuit; D, Operate in special area of anti-static, electrostatic materials are prohibited in anti-static work area, such as no anti-static plastic bags, boxes, foam, tape, notebook, paper, personal items and other items, these materials must be kept in more than 30 cm distance from the electrostatic sensitive devices; E, Use of anti-static packaging and anti-static turnover box or car during packaging and transportation; G, Prohibits hot plug operation for non hot plug devices; H. Avoid using multimeters to detect the sensitive electrostatic pin directly; I. Do electrostatic protection for fiber optic transceiver during operation (such as wear electrostatic ring or put hand on shell to release static etc.), contact the shell of the optical module , avoid contact PIN feet of the optical module ; Specification Of FA-TC901S13-40 - - - - Parameter | Symbol | Min. | Max. | Unit | Note | Transmitter Section: | | | | | | Differential Input Voltage | VIN | 500 | 2400 | mV | 1 | Data Rate | Rate | | | Mbps | | Optical Output Power | Po | -10 | -3 | dBm | 2 | Extinction Ratio | ER | 10 | | dB | | Central Wavelength | /FP | 1260 | 1360 | nm | | Output Spectrum Width | /FP | | 4 | nm | RMS | Output Eye | Compliance With ITU-T G.957 OC-3/STM-1 EYE Mask | Optical Rise Time | Tr | | 3 | ns | 20%~80% | Optical Fall Time | Tf | | 3 | ns | 20%~80% | Receiver Section: | | | | | | Differential Output Voltage | VOUT | 400 | 2000 | mV | 1 | Data Rate | Rate | | | Mbps | | Receiver Sensitivity | S | -34 | | dBm | 3 | Optical Input Overload | POL | -8 | | dBm | | Operating Central Wavelength | | 1260 | 1360 | nm | | Signal Detect- Deasserted | PRX_ A | -45 | | dBm | | Signal Detect- Asserted | PRX_ D | | -34 | dBm | | Signal Detect-Hysteresis | PH | 0.5 | 5 | dB | | Electrical | | | | | | Data Output Voltage Low | VOL VCC | -1830 | -1555 | mV | | Data Output Voltage High | VOH VCC | -1085 | 880 | mV | | Data Output Rise Time | tr | | 3 | ns | | Data Output Fall Time | tf | | 3 | ns | | Signal Detect Output Voltage-- Low | VSOL VCC | -2 | -1.58 | V | | Signal Detect Output Voltage-- High | VSOL VCC | -1.1 | -0.74 | V | | Signal Detected Output Rise Time | tr | | 3 | ns | | Signal Detected Output Fall Time | tf | | 3 | ns | | - - - - Main characteristics 155Mbps 1310nm 40km; With single 3.3V DC power supply; Difference LVPECL inputs and outputs; Standard SC fiber interface; Standard industrial 19 footprint; RoHS compliant; Operating Temperature 0~70;

About our Company

Business Type
Manufacturer
Products
Sfp Optical Transceiver, Wind Turbine

Contact Us

 Fiberall Technology Co., Ltd

Mr. Tao Tao

China

Send us a message