Three inch toilet cistern fittings with adjustable bottom fill valve
This set of toilet cistern fittings includes an adjustable bottom fill valve and a canister type 3 inches dual flush valve. The working pressure range is very wide, between 0.02Mpa and 1.6Mpa. Normally it can match toilet tank height from 240mm to 320mm. And you can further extend the range if you choose a high base for the body. It is high efficient water conservation toilet tank fittings compared with most of 2 inch dual flush mechanisms.
- - - -
Material: | ABS, POM, rubber, silicone. |
Color: | White, blue |
Net weight: | 705g +/-3% |
Fill valve installation height: | Adjustable from 220mm to 328mm (8.5"-13") |
Flush valve installation height: | 200mm (from the upper rim of gasket to the top) |
Inlet size: | G1/2" |
Outlet size: | 3" for 2-pc toilet |
Filling rate: | 4.5L/min |
Float: | Two piece design |
Overflow pipe: | Customized per requirements of each order |
Residual water level: | 4.5 cm for full flush, 6cm for partial flush |
Body rotation: | 90 degree |
Gasket: | 55/85/25mm (ID/OD/H) |
Endurance: | 200,000 times of filling and flush |
- - - -
# # Meet requirements of low pressure and high pressure.
# Heavy duty design.
# Made from strong high quality plastic material complied with ROHS.
# Easy to install and adjust.
# Wide water level adjustment range.
# Anti-siphon structure, no back flow.
# Silicone rubber ensure water tightness and leakage free.
# Three layers high gloss plating, meeting 8H neutral salt spray test.
# Stylish chrome plated flush button, available in different diameter.
# Adjustable overflow every 5mm.