3 inches water saving toilet cistern fittings dual flush for 1-pc toilet
This set of toilet cistern fittings includes an adjustable bottom fill valve and a canister type 3 inches dual flush valve. The working pressure range is very wide, between 0.02Mpa and 1.6Mpa. Normally it can match toilet tank height from 240mm to 320mm. And you can further extend the range if you choose a high base for the body. It is high efficient water conservation toilet tank fittings compared with most of 2 inch dual flush mechanisms.
- - - -
Material: | ABS, POM, rubber, silicone. |
Color: | White, green |
Net weight: | 705g +/-3% |
Fill valve installation height: | Adjustable from 220mm to 328mm (8.5"-13") |
Flush valve installation height: | 200mm (from the upper rim of gasket to the top) |
Inlet size: | G1/2" |
Outlet size: | 3" for 2-pc toilet |
Working pressure: | 0.02Mpa-1.6Mpa (2.9 psi - 232 psi) |
Float adjustment range: | no less than 70mm |
Noise level: | <=50 DB |
Re-fill tube: | Optional |
Overflow pipe: | Fixed height, customized per requirements of each order |
Flushing rate: | >=2.7 Liters per seconds |
Body rotation: | 360 degree |
Push button: | Dia. 58mm |
- - - -
# # WRAS approved.
# Meet requirements of low pressure and high pressure.
# Heavy duty design.
# Adjustable telescopic pipe every 5mm.
# Silent filling, acoustic comfort.
# Anti-siphon structure, no back flow.
# Instant close after water reaches working level.
# Varied refill rate available with different plugs.
# Soft hand feeling, less than 20N.
# Easy access for maintenance.