Universal toilet cistern fittings for toilet repair and DIY market
This set of toilet cistern fittings includes an adjustable bottom fill valve and a canister type dual flush valve. The working pressure range is very wide, between 0.02Mpa and 1.6Mpa. Normally it can match toilet tank height from 240mm to 320mm. And you can further extend the range if you choose a longer pushing rod for the push button. It is an economic choice for sanitary ware factory who need to find fittings for their two pieces or one piece WC.
- - - -
Material: | ABS, POM, rubber, silicone. |
Color: | White, blue |
Net weight: | 600g +/-3% |
Fill valve installation height: | Adjustable from 220mm to 328mm (8.5"-13") |
Flush valve installation height: | 200mm (from the upper rim of gasket to the top) |
Inlet size: | G1/2" |
Outlet size: | 2" for 2-pc toilet |
Toilet cistern height: | 240mm - 320mm |
Noise level: | <=50 DB |
Float: | Two piece design |
Flush volume: | partial flush and full flush, both adjustable |
Residual water level: | 4.5 cm for full flush, 6cm for partial flush |
Seal washer: | NBR rubber, flat |
Gasket: | 55/85/25mm (ID/OD/H) |
Endurance: | 200,000 times of filling and flush |
- - - -
# # Meet requirements of low pressure and high pressure.
# Innovative and universal design for most of toilets.
# Made from strong high quality plastic material complied with ROHS.
# Easy to install and adjust.
# Instant close after water reaches working level.
# Silicone rubber ensure water tightness and leakage free.
# Stylish chrome plated flush button, available in different diameter.
# Soft hand feeling, less than 20N.
# Easy access for maintenance.