Side entry toilet cistern fittings with button operated flush valve
This set of toilet cistern fittings includes a side entry fill valve and a canister type dual flush valve. The working pressure range is very wide, between 0.02Mpa and 1.6Mpa. Normally it can match toilet tank height from 280mm to 360mm. And you can further extend the range if you choose a longer pushing rod for the push button. It is an economic choice for sanitary ware factory who need to find fittings for their two pieces or one piece toilet.
- - - -
Material: | ABS, POM, rubber, silicone. |
Color: | White, blue |
Net weight: | 600g +/-3% |
Fill valve installation height: | Adjustable from 220mm to 328mm (8.5"-13") |
Flush valve installation height: | 240mm (from the upper rim of gasket to the top) |
Inlet size: | G1/2" |
Outlet size: | 2" for 2-pc toilet |
Float adjustment range: | no less than 55mm |
Toilet cistern height: | 280mm - 360mm |
Overflow pipe: | Height adjustable from 210mm to 330mm, min. adjustment scale 5mm |
Actuation force: | <=20N |
Seal washer: | NBR rubber, flat |
Push button: | Dia. 38mm, only for top mounted |
Endurance: | 200,000 times of filling and flush |
- - - -
# # WRAS approved.
# Meet requirements of low pressure and high pressure.
# Made from strong high quality plastic material complied with ROHS.
# Speedy refilling flow (4.5L/min).
# Steady refilling, no splash.
# Anti-siphon structure, no back flow.
# Instant close after water reaches working level.
# Stylish chrome plated flush button, available in different diameter.
# Easy access for maintenance.