3 inch water saving toilet cistern fittings dual flush for 2-pc toilet
This set of toilet cistern fittings includes an adjustable bottom fill valve and a canister type 3 inches dual flush valve. The working pressure range is very wide, between 0.02Mpa and 1.6Mpa. Normally it can match toilet tank height from 240mm to 320mm. And you can further extend the range if you choose a high base for the body. It is high efficient water conservation toilet tank fittings compared with most of 2 inch dual flush mechanisms.
- - - -
Material: | ABS, POM, rubber, silicone. |
Color: | White, green |
Net weight: | 705g +/-3% |
Fill valve installation height: | Adjustable from 220mm to 328mm (8.5"-13") |
Flush valve installation height: | 200mm (from the upper rim of gasket to the top) |
Inlet size: | G1/2" |
Outlet size: | 3" for 2-pc toilet |
Working pressure: | 0.02Mpa-1.6Mpa (2.9 psi - 232 psi) |
Filling rate: | 4.5L/min |
Re-fill tube: | Optional |
Overflow pipe: | Fixed height, customized per requirements of each order |
Flushing rate: | >=2.7 Liters per seconds |
Actuation force: | <=20N |
Seal washer: | NBR rubber, flat |
- - - -
# # WRAS approved.
# Meet requirements of low pressure and high pressure.
# Wide water level adjustment range.
# Adjustable telescopic pipe every 5mm.
# Speedy refilling flow (4.5L/min).
# Instant close after water reaches working level.
# Varied refill rate available with different plugs.
# Silicone rubber ensure water tightness and leakage free.
# Three layers high gloss plating, meeting 8H neutral salt spray test.
# Easy access for maintenance.