Cable operated toilet cistern fittings dual flush for close couple toilet
This set of toilet cistern fittings includes an adjustable bottom fill valve and a cable dual flush valve. It is a good choice for DIY market as it can perfectly match almost every toilets with bottom inlet hole. For toilets of different heights and different button hole sizes, it can easily fit. Many wholesalers order this set and distribute to DIY market of toilet repair, toilet retrofit, old toilet upgrade, etc.
- - - -
Material: | ABS, POM, rubber, silicone. |
Color: | White, green |
Net weight: | 630g +/-3% |
Fill valve installation height: | Adjustable from 220mm to 328mm (8.5"-13") |
Flush valve installation height: | 180mm (from the upper rim of gasket to the top) |
Inlet size: | G1/2" |
Outlet size: | 2" for 2-pc toilet |
Working pressure: | 0.02Mpa-1.6Mpa (2.9 psi - 232 psi) |
Float adjustment range: | no less than 70mm |
Toilet cistern height: | 220mm 450mm |
Float: | Two piece design |
Flushing rate: | >=2.3 Liters per seconds |
Residual water level: | 4.5 cm for full flush, 6cm for partial flush |
Body rotation: | 90 degree |
Push button: | Compatible with lid hole dia. 18mm-50mm |
Push button installation: | could be top / side / front mounted |
- - - -
# # Innovative and universal design for most of toilets.
# Easy to install and adjust.
# Wide water level adjustment range.
# Silent filling, acoustic comfort.
# Anti-siphon structure, no back flow.
# Varied refill rate available with different plugs.
# Three layers high gloss plating, meeting 8H neutral salt spray test.
# Adjustable overflow every 5mm.
# Powerful rinsing flow(2.3L/s).
# Suitable for plastic and ceramic toilet cisterns.