3 inch flapper toilet repair kits with chrome plated tank lever
This set of toilet cistern fittings includes an adjustable bottom fill valve and a 3 inch flapper flush valve operated with a front mounted tank lever. It is a typical toilet repair kits for single flush toilet with 3 inch outlet. Besides the silicon rubber seal, the flapper is also available in natural rubber, PVC, etc. And you can also use a side lever or a push button to replace the front handle. It depends on the location of the hole.
- - - -
Material: | ABS, POM, rubber, silicone. |
Color: | White, green |
Net weight: | 550g +/-3% |
Fill valve installation height: | Adjustable from 220mm to 328mm (8.5"-13") |
Flush valve installation height: | Fixed height (depends on height of overflow pipe) |
Inlet size: | G1/2" |
Outlet size: | 3" for 2-pc toilet |
Working pressure: | 0.02Mpa-1.6Mpa (2.9 psi - 232 psi) |
Float adjustment range: | no less than 70mm |
Noise level: | <=50 DB |
Re-fill tube: | Optional |
Residual water level: | 4.5 cm for full flush, 6cm for partial flush |
Seal washer: | NBR rubber, flat |
Tank lever: | Front mounted |
Gasket: | 76/115/33.5mm (ID/OD/H) |
- - - -
# # WRAS approved.
# Meet requirements of low pressure and high pressure.
# Adjustable telescopic pipe every 5mm.
# Silent filling, acoustic comfort.
# Speedy refilling flow (4.5L/min).
# Silicone rubber ensure water tightness and leakage free.
# Adjustable overflow every 5mm.
# Soft hand feeling, less than 20N.
# Long endurance, 5 years warranty.
# Suitable for plastic and ceramic toilet cisterns.