Orange Standard Body Shop Paint Booth 700052003400 MM Outside Dimension
1. Diesel burner heating.
2. All panels are tongue and groove interlock structure
3. Exhaust option.
4. Quality brand-name turbo fan.
5. Ceiling light only.
6. Spray booth specific, dual voltage LED light fixtures
7. Different is option.
In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean,
symmetrical and steady-going down airflow for spraying,After painting, hot air goes from heating
generators to plenum, then enters room after filtered by ceiling filter, providing heat that is necessary for baking of cars surface. Afterwards, the air with little benzene will be released to the atmosphere after being filtered one time by the exhaust air filter.
This model standard spray booth makes good effect in painting and baking,with a economic price,and can provide a good environment for workers.
- - - -
Item | Detailed Specification |
Inside dimension | 690039002650 mm (LWH) |
Outside dimension | 700052003400mm (LWH) |
Front door | Folding door, 3 folds, 30002600 mm (WH), without frame, aluminium alloy window frame, orange colour, door head and two batten on both sides white colour. |
Emergency door | 1 units, 6501800mm (WH), colour: white. |
Basement | Galvanized steel assemble, 300mm high, galvanized steel support, 2 rows grilles made by flat bar and twisted steel, silver colour, 3 rows indented plate, silver colour, 2 ramps, 5202000mm/pc, silver colour. |
Wall panel | Thickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm colour steel with EPS inside, colour: white. |
Light | Ceiling Lights: 8Units4Pcs=32Pcs36W, no side lights, with LED, lighting boxes are powered coated. |
Generator cabinet | Intake from back upper, exhaust from rear upper, galvanized steel frame; orange machine-made panel covered, filled with heat preservation material inside. |
Intake and Exhaust system | Inlet:15.5KW turbo fan, air capacity for each fan: 21000m3/h. |
Outlet: optional, 4m ducts, 1 pcs 900 bend. |
Heating system | BT18 diesel burner, stainless steel heat exchanger, pneumatic damper actuates from spraying to baking cycle. Max. heating productivity: 180000kcal/h, max temperature: 80, 4pcs chimney, 1 pcs bend. |
Purification system | Pre-filter, ceiling filter, fibreglass filter. |
Roof | Galvanized steel |
Control system | Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, all motors is normal start. |
Total power | 7.5KW (Power supply 1220V, 3380V, 50HZ)
- - - -