JMQB5 X 6-10 Turbine High Shear Pump
The JMQB5 X 6-10 Shear Pump generation is uniquely design pump for shearing polymers and
clays. To improve the drill fluid properties, the polymers or clays should be highly sheared
before adding to the drill fluid system. If not sheared, the polymers maybe jam the strainer
and will result in losing amount of polymer and increasing drilling costs, and the large-size
solids in the drill fluid will harden and difficult to clear away as well. The JMQB5 X 6-10
shear pump has proven best for applying the high shear necessary to hydrate polymers and
clays and to their best properties. Using the JMQB5 X 6-10 shear pump reduces the bentonite
clay needed by 33% or more and polymer needed by 15% or more. It also improves fluid loss and
filter cake, builds gel strength, and low shear rate viscosity to better hold up solids. With
reliable shaft seal structure and more convenient in operation and maintainance, it comes up
to advanced world standards in the same products.
Explanation of sectional
The JMQB5 X 6-10 Shear Pump adopts a set of compound seal for no leakage at stuffing box.
Inside pump is a 300 series stainless steel turbine containing 44 nozzles, through the pump.
This turbine shear pump is mounted on a special base with belts and sheaves 10 drive pump,
OSHA type belt guard and a 75HP(55KW) explorsion U/L approved electric motor, 460 volt, 3
phase 60 cycle. Included is a special hopper(ZHP150) with nozzle sized for this application
and one mud kit as a package in order to build a complete shear and hydration system. The
pump is designed to give longer service life through the improved shaft seal.