Grey Vibration Damping Material For Soundproofing Insulation Self - Adheisve
Black Vibration Stopping Material With Aluminum Foil Self - Adheisve Accept OEM 2mm
ASLONG Car sound deadener made of pure butyl rubber. The surface is stick with Pressure Case pure 0.1 Thickness aluminum foil,a good device for the automobile shock andabsorption. products accord with the ROHS Index.
Surface Aluminum foil is Press with square pattern , with good looking and meet with more customers need!
Mainly used incar doors, hoods, trunk,floors,a special corrosion resistant and bioglide coating film technology and make sure that the surface of the aluminum foil is steady and anti-oxidant.
1. Excellent Self-Adhesive property
2. Environmental Protection
3. Good Early Sticky And Viscous
4. Flexible And Conformable
Aluminum oxidant process that may affect the health of human body.
Moreover, our products are of great quality: the early sticky and the viscous could reach the index of GB4852-84 / T4851-2002. In the test of ROHS PB , Cd , Cr+6 , Hg , PBBs and PBDEs are not found.
Competitive Advantage :
Aslong Butyl rubber pad adopts advanced polymer materials and made of advanced production technology, non-toxic , fire prevention , waterproof , shock-proof , easy construction , permanent sticky , have very strong viscosity , etc.
Loved by consumers all over the world for many years.
Release the structure transmission attenuation vibration energy
Reduce Road noise and vibration
Improve stereo Sound quatity
- - - -
Technical data : | |
1. product Model : | A1 |
2. Aluminium thickness : | 0.1 mm |
3. Butyl thickness : | 1.9 mm |
4. Weight per square meters : | 3.8 KGS |
5. Total Weight Per Sheet : | 1.4 KGS |
6. Temperature range : | Celsius -40 up to 160 |
7. Packed with Carton | 10 pcs / Carton |
8. Total Dimension | 460mmX800mm (=0.368 M) / Sheet Accept your request size !! |
- - - -
car doors , floor , deck lids , wheel fender , back trunk , four-wheels and wings board , engine cover or other metal parts
1, Use scissors , knife or die to cut the mat to the desired size and shape before removing the release liner.
2, Next , remove dust , grease , moisture , and other foreign matter from the application surface.
3, Peel off the release liner . The simplest application technique is to bend the mat slightly and attach it along its shortest edge. Press the mat firmly into place, using a roller for larger pieces. The roller reduces the risk of leaving air pockets, which reduce sound damping capacity. The temperature of the mat and application surface should not be below room temperature during fitting. Heating the material is not necessary.