CE Approved Active 1 Phase 2 Wire Din Rail Energy Meter With LCD Display for Household
Model YEM011JC is 1 Phase 2 Wire Din Rail Energy Meter.It adopts many advanced technologies of research and development, like micro-electronics techniques, specialized large-scale IC (integrated circuit), digital sampling and processing technology, SMT technology, and so on.The meter is produced as perrelevant technical requirements of international standard IEC 62053-21. It has class one high accuracy. You canselect 35mm DIN rail installation or install it on the board. This energy meter is intended for househould use.
- - - -
Model | Accuracy | Reference Voltage | Current Specification | Starting Current | Insulation Performance |
YEM011JC | Class 1 | 127/230V | 5(30)A 10(50)A 20(100)A | 0.02A 0.04A 0.08A | AC voltage 4kv for 1 min, 1.2/50us waveform impulse voltage 6kv |
- - - -
* If you need different reference voltage or current specification, please advisory our sales personnel.
1. 35mm standard DIN rail installation.
2. The meter can accurately measure and display total active energy consumption by LCD Display.
3.LCD display 6+1 display default, also can make it5+2 (two decimal) dispaly.
4. Standard configuration Impulse output passive (polarity),May select distant impulse output passive (no polarity). And contact with all kind of AMR system conveniently,complying with standard IEC 62053-31 and DIN 43864.
5. Two LED instructions respectively power supply state (green) and signal of energy impulse (red)
6.Standard configuration dont detection direction of the flow of load current. May select automatic detection the direction of the flow of load current. And instructions by an individual LED.
8. Standard configuration type S wiring (Inlet from bottom, outlet from top) for direct connect operation, we can also choose another type of connection, and use CT (Product Configuration code is IC) and PT & CT (Product Configuration code is HC) for operation.
9.Extension terminals cover is available, in order to ensure safety.