240V Latest Design 1 Phase Electric Electronic Energy Meter With SMT Technology
Model YEM313 is the new typesingle phase two wire electronic front board installed active energy meter
for measuring power consumption. It adopts micro-electronics technique, and imported large scale integrate circuit, uses advanced technique of digital and SMT ( Surface Mount Technology )techniques, etc. The meter completely accords with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21 (Electricity Metering Equipment (AC) Particular RequirementsPart 21Static Meters for Active Energy (Ciass1).It can accurately and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net, it is used for setting indoor or setting out door directly, and this meter has seven digits LCD displays to show the active energy consumption. And there is a maintenance-free lithium batteries in it, used for displaying power cut reading. It has following features: good reliability, small volume, light weight, specious nice appearance, convenient installation, etc.
- - - -
Model | Accuracy | Reference Voltage | Current Specification | Starting Current | Insulation Performance |
YEM313 | Class 1 | 127/230V | 5(30)A 10(60)A 20(100)A | 0.02 A 0.04A 0.08A | AC voltage 4kv for 1 min, 1.2/50us waveform impulse voltage 6kv |
- - - -
* If you need different reference voltage or current specification, please advisory our sales personnel.
1. Front board three fixed installation, the cover is made of PC material which is transparent and anti-UV molded overall, the bottom and the terminal of the meter are made of black glass fiber which can fire-retardant and enhanced PC material, and the IP rating up to IP56. It has following features: goodweatherability, anti-impact, good insulation performance, specious appearance, etc.
2. The meters cover has one transparent window at the front for reading of all the displayedvalues and parameters, name plate details and observation of all the operation indicators.
3.The meters shall display all data and information on LCD display.
4. Seven digits display LCD, standard configuration 6+1 digits display (999999.1kWh,). May select 5+2 digits display (Please specified when ordering).
5.Two LED instructions respectively power supply state (green) and signal of energy impulse (red).
6. Automatic detection the direction of the flow of load current. And Instructions on individual LED. (Only yellow energy impulse signal when working, that is meaning the direction of the flow of load current reverse).
7.Single direction single component measure single phase two wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
8. Direct connect operation, there are two types wiring you may select. Standard configuration type 1B wiring, may select type 1A wiring (Product Configuration code is DS).
9. Standard configuration extension terminals cover, in order to protect to use safety, may select short terminals cover. (Product Configuration code is MC).
10. We can provide samples for your testing before bulk order and can provide technical support.