Home / Vichle Decoration Self Adhesive Vinyl Film with Macromolecule Carbon Fiber
Decorative film(carbon fiber)is a very popular material, used in many places. They are printable with solvent, eco solvent inks and are easy for application, with those advantages, a personalized decoration can be get. They can be used for multiple purpose, such as advertising, celling decoration, floor decoration, car decoration and etc.
1) Car decoration: can be dressed up car engine hood, steering wheel, empennage, trunks, any interior and
exterior surfaces of a car. Excellently meeting your expectation of unique decoration
2) Change the color of your car in 2 days completely.
3) Used for wrapping laptop, Ipad, mobile.
4) Motorcycle decoration.
1) Clean the area thoroughly. Measure and place the sticker in the desired location. Put a piece of masking tapeon the sticker to hold it in place. Hint: For best results do not install the sticker in extreme heat or cold. surfacecontaminants will cause imperfections.
2) Lift the sticker up and peel the white paper backing off the sticker. Be careful not to pull the masking tape off.
3) Slowly lower the sticker and rub it in place with a scratch board or similar item. Hints: Using a soft rubbersqueegee will help smooth out bubbles and wrinkles
4) Wait a few minutes then slowly peel the clear cover off at an angle. Be very careful not to pull the sticker offthe surface. If the sticker pulls away from the surface repeat step 3.
Description of carbon fiber:
# Film: White Carbon Fiber,110m
# Adhesive: Removable clear PSA
# Liner: double sides PE coated,160gsm
# Width: 1.52m
# Length: 20/30/50m
# Carton Box/Hard Paper Tube/Pallets
- - - -
Carbon fiber(SCF120A): |
Description | CARBON FIBER |
Itemno | SCF120A |
ifedurability | 5~7years |
FaceFilm | highflexiblepolymericPVCfilm |
Weight of backing | 160gsqm |
Glue | withairchannels,transparent,polyacrylate, removablefromTaiwan |
Thickness of face film | 140micron |
ReleasePaper | Withairchannels,onesidesiliconizedpaper140g |
Adhesivepower(ofFINAT-FTM1,after24hours) | 16H/25mm |
Thickness of face film | 120micron |
Temperatureresistance | From-30Cto+250C |
Lacerationreluctance(DINENISO527) | Longitudinallymin150%acrossmin19Mpa |
FilmStyle | Withairchannels,airbubblefree |
- - - -
Specification of carbon fiber:
- - - -
Item | FaceFilm (micron) | Adhesive | ReleasePaper (g/sqm) | Width (m) | Length (m) |
SCF120 | 120 | transparent,polyacrylate,removable | 140 | 1.52 | 50 |
SCF120A | 120 | transparent,polyacrylate,removable | 140 | 1.52 | 50 |
SCF120MT(metal) | 120 | transparent,polyacrylate,removable | 140 | 1.52 | 50 |
CWV1200 | 90 | transparent,polyacrylate,removable | 140 | 1.52 | 50 |
CWV1200SP(Sparkle) | 90 | transparent,polyacrylate,removable | 140 | 1.52 | 50 |
- - - -
Picture of carbon fiber: