50M 3528 High Voltage LED Strip Waterproof , LED Flexible Strips Ultra Bright
# High voltage version, directly connect 110v/220v, no need led power supply
# High brightness, low decay, stable quality, long lifespan
# Easy to use and install, 50m/reel, IP67 protection, install with clips or glues
# Non-dimmable, 4 BINS, 2700-6500K
# Cove lighting using AC110-220V
# Architectural lights for canopy, archway
# Backlight or edge lighting for signage
# DIY lights for home use
# Path and contour marking
# Decorative lights for holiday, event, show, exhibition, hotel
IP rating: IP67
- - - -
Details | Item | Unit | Specification |
Physical data | LED type | SMD | 3528SMD |
LED Qty /meter | LED/m | 120 |
Dimensions | mm | 16mm*50000mm*8mm |
Type of protection | IP | IP67 |
Working temperature | C | 0-40C |
Electrical data | Power | W/m | 7W / m |
Voltage | VDC | 110VAC / 220VAC |
Optical data | Luminous flux | LM/m | 513LM / m |
Beam angle | degrees | 120 |
Light color | | Warm white / Natural white / Cool White / Red / Yellow / Green / Blue |
Color BINs | | 5 BINs |
Color temperature | K | WW : 2700 - 3000K |
NW : 4000 - 4500K |
CW : 6000 - 6500K |
Color rendering index | CRI | 70-90 |
Order reference | HS code | 94054090 |
Part. no | LC120-HV3528-W |
- - - -
- - - -
Items | HS code | Packaging unit | meters per box | reels per box | Dimensions(mm) LxWxH | Gross weight | Volume(cbm) |
HV Led Strip | 94054090 | Shipping carton box | 100m | 2reels | 500*350*250 | 12kg | 0.04375 |
- - - -
# The strip itself and all its components may not be mechanically stressed.
# Assembly must not damage or destroy conducting paths on the circuit board.
# Installation of LED ribbon (with power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations.
# Correct electrical polarity needs to be observed. Wrong polarity may destroy the strip.
# Parallel connection is highly recommended as safe electrical operation mode.
# Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload and damage the strip.
# Please ensure that the power supply is of adapters power to operate the total load.
# When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical isolation points between strip and the mounting surface.
# Pay attention to standard ESD precautions when installing the strip.
# Damaged by corrosion will not be honored as a materials defect claim. It is the users responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements.
# Caution needs to be taken while doing the connection after cutting the strip. Only authorized professionals can do the work to enable it waterproof in wet locations.