3 in 1 EU License PlateVideo Car Parking Sensors with 1 Camera and 2 Sensors
- - - -
voltage | DC 9VDC 15V |
Ratedvoltage | DC 12V |
Rated Current | 50 mA ~ 180 mA |
Power | 3.6W |
Alarmdistance | 0.3m2.0m |
Sensordiameter | 22mm |
Installmode | drill |
Sensorangle | X,Y,60 |
Ultrasonic Frequency | 40KHz |
worktemperature | -30---+70 |
Alarmtype | Colorized LCD,Buzzer(BiBi.) |
alarmvolume | 65dB |
Alarmfrequency | 1.6-2.0m:0.5HZ(slowness)1.1-1.5m:1HZ(slowness) 0.6-1.0m:3HZ(commonly)0-0.4m:BI----- |
- - - -
Parking sensor system is a high-techproduct. It applies 4/6/8ultrasonic wave sensors to measure the distance between thecar and the obstacles, and reminds the driver of safe distance accurately whilereversing a car.
This model features EU plate shape,combiningthe reversing camera in the middle with2 sensors at the left and right side. Reversing image and distace are displayed on the monitor or car DVD screen. (The system does not include the monitor)
2. Thesystemcouldbeconnectedwithall kinds of carmonitors
3. 2 sensors and 1 camera combined to display bothreversing image and distance
4. High definition and wide angle camera
5.Alarm by BIBI sound
6. High-quality and easy to install
7. Waterproof design
Parking Sensors Main Parts:
1. Display: Back vision display, distance numeric display, buzzer alarm circuit , etc ,normally set inside the driving room.
2. Control Unit: MCU control circuit, normally set inside the trunk, nearby thebackup lights.
3. Sensor: Ultrasonic sensor "electronic eye", is the transmisson center for detectingsignals and normally set at the rear or front of bumper. For 4 sensors, all of them are installed on the rear bumperfor 6 or 8 sensors, 4 are on rear bumper and the rest are on front bumper.