High and Low Temp Resistant Spark Plug Connector with Rubber Boot Ceramic Resistor and Shield
- - - -
Raw material properties | Shore-A hardness | 555A |
Elongation at break | 300% |
Tear strength | 15N/mm |
Dielectric strength | 20KV/mm |
Tensile strength | 6N/mm2 |
Tensile deformation | 20% |
Density | 1.170.02 g/cm3 |
Withstand voltage 18KV for 30minutes | NO breakdown |
Surface resistance | 1011 |
Ageing resistance | 1552.5X168h,Without any cracking |
Product characteristics | Usage temperature | -20-155 |
Breakdown voltage (AC) | 30KV |
Insertion and removal forces | 20-70N |
Overall length | 1282 mm |
Resistance | 1K+40% |
Assembly dimension | Cable entry diameter | 60.5mm |
Assembly dimension: connecting cable | |
Plug entry diameter | 10.4-0.5mm |
Assembly dimension: connecting spark plug | |
- - - -
# # The connector has great heat resistance, cold tolerance, and dielectric properties.
# The boot of the connector is made bySilicone rubber, whichis odorless.
# The shield of the product owns a smooth surface. Logo can be added according to the customer.
# The shield Can prevent electromagnetic interference.
# Usage temperature of the connector is -20~155.
# The connector has the features of no transformation, acid and alkali resistance, and no dilatation.
# Automated assembly process make the connector having stable and conforming dimensions.
# Service life of the connector is not less than 50,000 km or 3 years.
# The connector can be designed and developed according to customers requirements.
# The connector is used in the ignition system of auto engine, see picture below: