Non - woven Embossed Line Slitting And Rewinding Machine CE Approval
Equipment for producing spunlace cloth, non-woven, wood pulp cloth non-woven embossed products, equipped with PLC programming and servo motor control, line pitch infinite. Can be customized embossing system according to customer requirements, production of core or coreless, hit or not hit the line products, one machine multi-purpose, welcomed the field visits.
Automatic non-woven points cutting machine can complete embossing, phone line, counting, cutting, coiling process end neat flatness, line is clear. Is the production of spunlace cloth, cloth, cloth and other pulp acupuncture non-woven embossed slitting rewinding equipment preferred.
- - - -
Model | QX-RB |
Cuttingdevice | circularknifecuttype |
Wiredevice | Screwthread |
Windingmode | Specialpneumaticcompressiondevice,technologyanddomesticlead |
Cuttingrawmaterial | Spunlacecloth,woodpulp,acupuncturecloth,withmaterial,fieldtest |
Productionspeed | 60-90 M / min |
Parametersetting | Colortouchscreen |
Controlprogram | PLCservodrive |
Weight | ofabout3500kgspecificweightdependingonthemachineconfiguration |
Compressedair | Customerowned |
Customization | specificcontactSalesManager |
- - - -
1. Collect roll length and all knurling electroplating and, large embossing device of an a, embossing roll a root by treatment of electroplating, another piece of the wool and production. Patterns of products can be customized according to customer requirements.
2 pneumatic automatic feeding device, pneumatic with wide belt conveyor, with automatic counting down function (infrared)
3 equipment cutting knife using the upper and lower, left and right to lift the knife device, improve the service life of the cutter, the rolling roller with a continuously variable speed device, can adjust the speed of winding.
4 the original cloth is placed in a wide belt, gas - up - axis, and the use of gear - type stepless speed regulator to adjust the tension device. Pneumatic synchronous delivery.
5 the air pressure of the winding roller.
6 using PLC programming and servo electrical control, make the hole pitch unlimited adjustable.
7 equipment with high precision aluminum alloy roller and the wrinkle, the tail moving correction system.
8. Stepless speed regulation, control embossing, line, slitting and rewinding speed, counting, online cutting on the knife 10 sets, can freely adjust the cutting size.
9 the equipment adopts imported frequency conversion control speed regulation, the electrical part of the machine is reasonable, safe, clean, easy to operate.
10 machine equipped with a control device, can produce a core no core complex products, can play the line or not to play the line, the configuration can be adjusted to the elastic device, speed control.
11. The whole frame use the formed steel, surface and antirust processing, all machine bedplate must do antirust paint processing, frame welding is accurate in size, stent of appropriate reinforcement, pulley, gear and all transmission part center accuracy, ensure the smooth operation of the machine, machine within two years will not be off the plastic phenomenon.
12. Standard fasteners of main parts of the hexagonal screw and high-quality domestic 45# steel, the product easy to cause the health impact of the parts are made of stainless steel materials, machine electricity part within two years will not rust, delamination.
13 the transmission gear and the important part of the transmission shaft of the material are the use of special technology hard heat treatment.
At present the same industry, the same equipment in the production of quality or technical indicators are not comparable with our factory