Small Manual Powder Coating Line With Curing Oven And Powder Spraying Machine
electrostatic powder coating system
1. small powder coating line
2.powder spray booth ,powder spraying machine ,curing oven
3.for smaller components and mixed goods.
Electrostatic Small Manual Powder Coating Line With Curing Oven
Powder Coating by Manual Application
Powder coating is done by a small handgun, ideal for smaller components and mixed goods.
Pre-treatment can be done - as shown- by blast cleaning or any other method suited for the finished product. Curing takes place in a box oven
The small assembly line usually consists of three basic equipment to complete the job of electrostatic powder coating
1) powder spray booth
2) powder spraying machine
3) curing oven
Small investment, small footprint, is not strictly required for the plant, and affordable
The pretreated articles are jigged and hung into thecoating booth on a fixed or rotatable jig-holder. Themanual coater coats the components from all sides.The articles are then moved out onto an oven trolley
(or directly into the oven). The trolley, if used, isrolled into the oven when full. In the oven, at atemperature of 180-220oC, in 10-15 minutes, thepowder melts, polymerizes fuses and cures into thefinal tough uniform and consistent powder coat thathas high aesthetic value. At the end of the curingschedule, the trolley is rolled out of the oven andallowed to cool down. The articles are then removedout from the paint-shop.