Coal briquette machine can be widely used for many industries. Coal briquetting plant may have some failures during the working process. How to solve them is the problem that should be given the top priority. The following content will discuss about the solutions to low balling rate of coal briquette machine.
coal briquette machine
Materials to be dealt by coal briquette machine are mainly in powders. For those powdered materials, they are not even in hardness, size and water content. Before the working process of coal briquetting machines, you should make the raw materials even at size and shape. You should use the material with water content as low as possible.
When being suppressed, powdered materials will rub with each other. Distance between powdered materials may be small or large. At a result, briquettes or balls produced by coal briquetting plant may be too loosened. During the working process of coal briquette press machine, raw materials are greatly pressed. Raw materials may be twisted or transformed if being powerfully pressed.
Briquettes or balls produced by coal briquette press machine will be very loose. You should notice whether distance exists between two rollers during the working process of coal briquette machine. If distance exists, balling rate of coal briquette machine will become zero. In another word, raw materials can be directly discharged out without being pressed by two rollers.
You should notice the alignment between ball sockets on press rollers. Or else, ball sockets would be misplaced. Then, finished products produced by coal briquette machine would not be in briquettes or balls. What’s worse, strength of balls would be influenced.
Fote Heavy Machinery: http://www.coal-briquettemachine.com/products/charcoal-briquette-machine.html
Fote Official Email: firstname.lastname@example.org