Red Automatic Sliding Gate Opener High Speed , Electric Gate Motor
Motor type: Brushed Reduction Type: Without Worm gear
Rated Voltage: 12V Rated Power: 180W
Application: Electric Sliding Gate
As its name implies, a slide gate either slides on wheels from left to right or right to left, not unlike many department store automatic doors.
Slide gate operators are commonly installed at the end of the gate in the closed position but can also be installed by the end of the gate in the open position. In America the most common form of automation is a chain attached across the gate near the bottom and passing through the operator, which shuttles it back and forth. In the end of the gate/open position you do not see the chain or any operating equipment near the gate.
- - - -
Type | Brush |
Voltage | 12VDC |
Power | 180W |
No load Speed | 4200rpm |
No load Current | 3.0A |
On load Speed | 3300rpm |
On load Current | 19.5A |
Stall torque | 655m.Nm |
Protection class | IP44 |
Weight | 2.0kg |
- - - -
Outline drawings of motor:
This kind of electric dc motor can be widely used for Electric Sliding Gate Openers
Quiet Operation - No need to let the neighborhood know when you come and go!
Safe and Secure - High security rolling code transmitters. Two remotes supplied.
Courtesy light -Comes on automatically when the door is in use. The light will stay on for approximately 3 minutes, then turns off automatically.
Automatic Safety Reverse Garage Ace sensors when someone or something is in the way, and reverses automatically.
Manual Override - Motor can be easily disengaged in the event of power failure for manual operation of door.
Handy Wall Switch - Door can be operated from switch on interior mounted control box independently of remote transmitter.
Automatic Run Time - If motor is activated while disengaged, the auto run time will turn motor off after 30 seconds
DIY Installation - Step-by-step instructions will guide you through installation. the opener can be installed on the left or right-hand side of the door.