400kw 160L Drop Door Type Banbury Internal Mixer For Artificial Leather And PVC Film
- - - -
Name | Banbury Mixer | Heating Way | Oil Or Steam |
Type | Drop door Or Internal | Feature | It is mainly used for plasticizing, mixing and final mixing the stock |
rotors | Chrome Plated and Alloy Hardfacing Electrodes |
Material | Cast Steel | Connect Way | cardan |
capacity | 200-250 Kg/batch | Certificate | CE |
- - - -
2, Total cubage: 160L,Rotary speed of front roll: 40r/min;Rotary speed of back roll: 34r/min;Motor power: AC 400kw/380W/50Hz;Oil heating or steam heating type.
Precision roller sphere bearing;Compulsory lubrication;The discharge door of the machine can be openedby person when the electric is off;
3. Equipment list
1 main body 1 group
2 press hammer and cylinder 1 group
3 material feeding device 1 group
4 discharge device 1 group
5 transmission device 1 group
6 electric control device 1 group
7 oil pressure and lubricate device1 group
8 tubing 1 group
1. PVC ArtificialLeather;
2. PVC film
3. PVC plastic floor
4. PVC plastic sheet
5. Plastic mixer
6. Rubber mixer
5. Main Technical Parameter:
- - - -
Project Model | S-75L | S-100L | S-120L | S-160L |
Working capacity of mixing chamber (L) | 75 | 100 | 120 | 160 |
Rotating speed of rear rotor (r/min) | 1:1.17 | 1:1.17 | 1:1.17 | 1:1.17 |
Main motor power (kw) | 160 | 220 | 300 | 400 |
Pressure of compressed air (MPa) | 0.6 | 0.6 | 0.6 | 0.6 |
Weight (t) | 22 | 24 | 28 | 32 |
Overall dimensions(mm) | 510022003000 | 550023003200 | 565023503300 | 580025003450 |
- - - -
6. Competitive Advantage:
1. PLC control system
3. Excellent dispersing effect
4. Best mixing chamber to get 100% mixing effect.
5. Fast mixing, good effectivity
7. Long life.
8. No leakage.
1. Oversea installation guide.
2. Oversea test running
3. Oversea worker training
4. Technical support
5. Supply of spare parts
6. Technical operation support
7. Formula and processing support
Two rotors mixer the relative rotation, the material from the feed mouth clamp into the roll gap by rotor extruding and shearing, after() through the roll gap above the top tied pien is divided into two parts, respectively along the chamber wall and the gap between the rotor before and after the return to roll gap above.In a week around the rotor flow, material is influenced by the shear and friction action, make rubber temperature rise sharply, lower viscosity, increased the wettability on the surface of the rubber in the compound, make good contact with rubber and compound surface.
9. Commercial Terms
1. Payment: 30% by T/T as advance payment, balance(70%) by T/T
2. Lead Time: 60 days after receiving the advance payment
3. Transportation: container, simple package ( PE film, salver)
4.Warranty period: From the day of the use of the machine in the buyersfactory:
(1) The mechanical Parts: 12 months
(2) The electrical Parts: 6 months
5. Installations and Commissioning
(1) Lastcommissioning will have beenmade before shipment
(2) Overseas Commissioning and charges
one or two technicians will be sent to the buyer to guide the installation and commissioning of the equipment if the customerrequests.
Customers need topay the charge of our technicians.
(1) Round-trip Airplane Ticket
(2) Charges of transportation, accommodation and communication
(3) The allowance for the technicians is USD 80 per day for one person.
(4) An interpreter is needed.
6. Spare parts:
Spare parts for one year are needed for the customers, and we suggestthat customers should buy the spare parts. (Fittings list will beprovided.)
7. English manual, Figuration drawing and footing drawings areprovided.