N-octyl Silicone （emulsion）waterproofing agent RJ-WP03（EH）has higher molecular weight than RJ-WP03(E), other features are similar to RJ-WP(E)
Stone, wood, fabric, reinforced concrete buildings, roof, internal and external walls, brick, concrete block brick, colored pavers, airport runways, gypsum board, flooring, boxes, etc., but also the substrate surface corrosion of ancient buildings , water, extending the life of the building waterproof material of choice.
Appearance milky white liquid
Solid Content 40%min
penetration depth ≥ 4mm
Centrifugal stability 3000rpm not centrifuge 30min hierarchical
1.test block on the drops are not absorbed by two hours 2.test on the block more than 90% lower water absorption Attention to use:
1.Clean Surface treatment before use.
2.The repellent will be diluted (watered down) after 10-20 times with a brush or spray painted to the dry brush treatment of the surface, the aspect of three times, for absorbent materials can be sprayed more than a few times, usually watered per kg The waterproofing agent can be sprayed 4-5 square meters.
3.It needs fully mixed before use. Within 24 hours after construction shall not be water washed.